undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined

Spiral cleaner

Gategory：

Key words：Water Filter、UV Sterilizer、Ion Exchange Water softener

Spiral decontamination device, also known as microbubble exhaust decontamination device, its core part is a spiral tube, which can remove free gas and microbubbles in the system. The spiral tube is a three-dimensional mesh structure made of copper wire welded, which can make the fluid produce a relatively static area in the valve, and even tiny air bubbles have enough time to separate from the fluid. The separated gas is collected in the gas chamber and emptied through the automatic gas release valve. At the same time, the pressure loss generated by the spiral tube is extremely small. The valve on the side of the valve body can remove suspended impurities.
Inquiry

Product introduction and principle

Spiral decontamination device, also known as microbubble exhaust decontamination device, its core part is a spiral tube, which can remove free gas and microbubbles in the system. The spiral tube is a three-dimensional mesh structure made of copper wire welded, which can make the fluid produce a relatively static area in the valve, and even tiny air bubbles have enough time to separate from the fluid. The separated gas is collected in the gas chamber and emptied through the automatic gas release valve. At the same time, the pressure loss generated by the spiral tube is extremely small. The valve on the side of the valve body can remove suspended impurities.25

Selection reference table

model flow
(T/h)		 Exit and entry diameter Sewage diameter
(mm)		 D
(mm)		 H
(mm)		 net weight
（Kg）
mm in
YLX-50 12.5 50 2 25 159 630 22
YLX-80 27 80 3 25 219 790 58
YLX-100 47 100 4 25 219 790 60
YLX-150 108 150 6 25 325 1050 116
YLX-200 180 200 8 25 426 1150 177
YLX-250 288 250 10 50 530 1320 232
YLX-300 405 300 12 50 630 2050 420
YLX-350 500 350 14 50 720 2240 556
YLX-400 650 400 16 50 820 2350 765

The above data is for reference only, and the data of each product shipped shall prevail.

Design Features

1. It can greatly shorten the start-up time after the initial water injection in the system, and there is no need to empty it.

2. Good removal of microbubbles and a large amount of free gas to maintain a better heat transfer state.

3. Extend the service life of the equipment.

4. Solve the problems of oxygen corrosion and pump cavitation in the system.

5. There is no noise when the system is running.

Consult now

Submit

*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible