PRODUCTS


Quartz sand filter
Gategory:
Key words:Water Filter、UV Sterilizer、Ion Exchange Water softener
Overview
This product is suitable for industrial and mining enterprises and urban water supply treatment equipment that require the turbidity of the filtered water to be generally within 5 mg/L and meet the drinking water quality standards for industrial or domestic water. It has a good removal effect on suspended solids in industrial sewage.
The agglomerated flakes contained in the water can not be removed by the precipitation method, and the water can be passed through the filter layer installed in the pressure filter to make the water transparent.
This product is divided into two types of water inflow conditions:
The single-layer filter material filter is suitable for the raw water whose influent turbidity is often about 100 mg/L and has not been coagulated and precipitated (for example, when raw water with higher turbidity is often used, attention should be paid to the shortening of the operation period or the reduction of the filtration rate) ), this kind of filter should be filled with coagulant in the front.
Double-layer filter material filtration is suitable for precipitation water whose influent turbidity is generally below 15 mg/L and higher than 20 mg/L.
Main technical conditions and description
Working pressure: 5kgf/cm2
Inlet water temperature: 20℃
Running speed: 10m/h
Turbidity: Influent <20mg/L, effluent <5mg/L
Above ¢2400, compressed air is required to assist in recoil.
Mechanical filters, iron and manganese removal filters can be equipped with multi-way valves according to user requirements.
Selection reference table
model |
flow (T/h) |
Tank diameter (mm) |
Total height (mm) |
進出口徑 (mm) |
承壓 (MPa) |
YLD-SF-500 |
2 |
500 |
2350 |
DN32 |
0.6 |
YLD-SF-600 |
3 |
600 |
2380 |
DN32 |
0.6 |
YLD-SF-700 |
4 |
700 |
2400 |
DN40 |
0.6 |
YLD-SF-800 |
5 |
800 |
2400 |
DN40 |
0.6 |
YLD-SF-900 |
6 |
900 |
2500 |
DN50 |
0.6 |
YLD-SF-1000 |
8 |
1000 |
2600 |
DN50 |
0.6 |
YLD-SF-1200 |
11 |
1200 |
2700 |
DN65 |
0.6 |
YLD-SF-1400 |
15 |
1400 |
2800 |
DN65 |
0.6 |
YLD-SF-1500 |
18 |
1500 |
2850 |
DN65 |
0.6 |
YLD-SF-1600 |
20 |
1600 |
2900 |
DN80 |
0.6 |
YLD-SF-1800 |
25 |
1800 |
3000 |
DN80 |
0.6 |
YLD-SF-2000 |
30 |
2000 |
3100 |
DN100 |
0.6 |
YLD-SF-2200 |
38 |
2200 |
3180 |
DN100 |
0.6 |
YLD-SF-2400 |
45 |
2400 |
3330 |
DN100 |
0.6 |
YLD-SF-2500 |
50 |
2500 |
3380 |
DN100 |
0.6 |
YLD-SF-2600 |
55 |
2600 |
3430 |
DN125 |
0.6 |
YLD-SF-2800 |
60 |
2800 |
3530 |
DN125 |
0.6 |
YLD-SF-3000 |
70-80 |
3000 |
3630 |
DN125 |
0.6 |
YLD-SF-3200 |
80-100 |
3200 |
3730 |
DN150 |
0.6 |
The above data is for reference only, and the data of each product shipped shall prevail.
Related Products
*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible